Bedroom wiring finished

Finished up the master bedroom fan switch wiring this weekend. It turns out that after I removed the downstream wiring from the box, I was able to fit the switch in the box just fine. No need to muck around in the attic pulling new wire. Five years ago, when I had more time on my hands, I probably would have pulled that wire. But now, if there’s a shortcut to be taken, I’m taking it.

I also replaced the rest of the outlets in the room. On the last outlet I replaced (the outlet to the left of the closets, behind Cathy’s dresser) the outlet box was a little screwed up… kind of hard to describe, but it’s one of those boxes that can be expanded by removing the side and ganging it together with another box. And anyhow, the removable side, which was attached to the adjacent stud, was loose, and the rest of the box was a little loose and crooked. I fixed it up the best I could, but in a perfect world, the box should really be replaced. Again though, that’s one to put on the list for some mythical time in the future when I have lots of spare time.

I also winterized the pressure washer and finished hooking up the unloader line on the air compressor. As of today, I haven’t yet managed to psyche myself up enough to turn it on and see if it works.

So all in all, not a bad weekend around the house.